The ConferX 8x4 Matrix Switcher is ideal for any conference room, classroom, or huddle space. This 4K switcher can display any of the eight sources through both the HDBaseT and HDMI output ports. All four of the outputs are completely independent of each other, allowing the user to show four sources at the same time. Working with a microphone or intercom system will not be a problem with additional audio inputs and outputs. When you need a stable solution for video distribution, look to the entire line of ConferX products.

With two HDBaseT inputs, this switch works alongside two directly connected ConferX Wall Plate Transmitters. You can have HDMI, VGA, or USB-C inputs up to 100 meters from the AC-CX-84. With the Quick Switch feature, these remote sources still switch simultaneously as a local HDMI source, keeping your system running smoothly. This allows a teacher or presenter to use their laptop directly at the podium or presenter’s station without connecting anything to the matrix switcher. The AC-CX84-AUHD gives any end user a simplified experience for sharing ideas inside a classroom, conference room, or huddle space.

Ultra High Definition - This unit supports 4K60 (4:4:4) 18Gbps signaling for today’s modern office. As displays get larger and new PCs default to 4K resolutions, your video distribution products must be built to handle these high resolutions.

Distance - By using any ConferX 100 meter wall plate transmitter or the AVPro Edge RNE receiver, the transmission distance for HD 1080P is 100 meters (330ft) & 4K is up to 70 meters (230ft) into the matrix! Additionally, go 100M on 1080P, 70M on 4K from the HDBaseT output to a display.

Mirrored Mode - This allows users to mirror the images of output 1 and 2, then separately mirror outputs 2 and 3. This enables you to play the same source through the HDMI and HDBaseT ports that are side by side. This turns your 8x4 into an 8x2 with mirrored HDMI and HDBaseT outputs.

Quick Switch - Quick Switch is a new process of switching video sources that allows for faster switching. With Quick Switch, you can change sources on screen quickly. For a 4k30 signal, you can switch under 3 seconds; for 1080p signals you can switch under 2 seconds!

Control - Simple front panel control, a web-based GUI, IR, and RS232 control is available.

Power - The ConferX 8x4 can power both the HDBaseT transmitters and the HDBaseT receiver. This eliminates unnecessary power supplies and cleans up the look of your installation.

Interoperability - Because this matrix switcher has an HDBaseT input and output, it can work alongside any standard HDBaseT equipment. 

HDBaseT Input:

• AC-CXWP-HDMO-T (allows for an HDMI input. 100 meters 1080p, or 70 meters 4k)

• AC-CXWP-VGA-T (allows for switchable VGA and HDMI inputs. 100 meters 1080p, or 70 meters 4k)​

• AC-CXWP-USBC-T (allows for switchable USB-C and HDMI inputs. 100 meters 1080p, or 70 meters 4k)​

• AC-EX70-444-TNE (100 meters 1080p, 70 meters 4k@18Gbps)

​

HDBaseT Output:

• AC-EX70-444-RNE-P (100 meters 1080p, 70 meters 4k@18Gbps)

• AC-EX70-SC2-R (100 meters 1080p, 70 meters 4K@18Gbps)